Pioneer DVR340 Operating Instructions - Page 40
G-Code programming with the, power off
![]() |
View all Pioneer DVR340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
05 Recording • If the channel number is set, but incorrectly, set up the guide channel (see G-Code CH Setting on page 112). 4 Select 'Store Program' to finish. • Other options in the same menu panel allow you to name the program, and change the recording destination and/or recording mode. Checking/editing timer recording settings You can check and/or edit the timer recording settings made by the G-Code system by selecting Details from the GCode# setting screen. ENTER 1 Select 'Details' from the G- Code# setting screen. The Timer Program Set screen appears, filled out with the timer recording details. 2 Check and edit the fields as necessary. See Setting a manual timer recording on page 41 for more on this. ENTER 3 Select 'Store Program' to save the timer program and exit. G-Code programming with the power off You can enter a G-Code programming number when the recorder is in standby. Note that the recording is always made to the HDD. If you want to record to a DVD disc, you'll need to switch on the power and use the full G-Code program screen. Important • You can't use this feature until you have set up the guide channels. See G-Code CH Setting on page 112. • You can't change the recording mode. • You can't program daily or weekly timer recordings. 1 Press 'G-Code'. The front panel display shows the current recording mode and prompts you to enter the G-Code programming number. 2 Use the number buttons to enter the number. • To clear the last digit entered, press CLEAR. 3 Press ENTER. The display shows the timer settings: Date Start time End time HDD and Recording channel Recording mode. • If CODE ERROR appears in the display, check that the number is correct and that the guide channel is set (see G-Code CH Setting on page 112), then set the timer recording again. • If CAN'T SET appears in the display, it means that although you entered a valid number, the program has already finished. 40 En
![](/manual_guide/products/pioneer-dvr340-operating-instructions-2aeebe3/40.png)