Pioneer DVR340 Operating Instructions - Page 54

06 Playback PLAY 3 Start playback. • If you're playing a DVD-Video or Video CD, a disc menu may appear when you start playback. Use the / / / buttons and ENTER to navigate DVD disc menus, and the number buttons and ENTER for Video CD menus. • When playing video from the HDD, playback will automatically stop after the end of a title is reached. • There may be a slight pause when playback switches from the first to the second layer of a dual-layer disc. • See the following sections for more details on playing specific kinds of discs. STOP 4 Press to stop playback. 5 When you've finished using the recorder, eject the disc and switch the recorder back into standby. Playing DVD discs The table below shows the basic playback controls for DVD-Video, and recordable DVD discs. PLAY Press to start playback. If RESUME is displayed onscreen, playback starts from the place last stopped. STOP Press to stop playback. You can resume playback from the same point by pressing PLAY. (Press STOP again to cancel the resume function.) PAUSE Pauses playback, or restarts playback when paused. REV SCAN FWD SCAN Press to start scanning. Press repeatedly to increase the scanning speed. PREV NEXT Press to skip to previous/next chapter/title. (During playback you can also use the front panel CH +/- buttons.) DVD+R/DVD+RW only: PREV may not always skip to the previous title. ABC DEF Except VR mode: During play- GHI JKL MNO back, enter a chapter number PQRS TUV WXYZ then press ENTER to skip directly to that chapter within CLEAR CLEAR the currently playing title. On some discs, you can also ENTER use the number buttons to select numbered items in the disc menu. VR mode only: During playback, enter a title number then press ENTER. All: Press CLEAR to clear a number entry and start again. 54 En