Pioneer DVR340 Operating Instructions - Page 28

04 Getting started Chapter 4 Getting started Switching on and setting up When you switch the recorder on for the first time, you can make several basic settings using the Setup Navigator feature. This takes you through setting the clock, the internal TV tuner and the video output. If you're using the recorder for the first time, we strongly recommend you use the Setup Navigator before starting to use the recorder. ENTER 3 Choose a language (then press ENTER). Initial Setup Basic Tuner Video In/Out Audio In Audio Out Language Recording Playback Clock Language Input Line SystemEnglish Power Save Help Español Setup Navigator Italiano Português Important • Some of the Setup Navigator on-screen displays (OSDs) in this section vary slightly depending on the country or region of purchase. 1 Switch on your TV and set the video input to this recorder. STANDBY/ON 2 Switch on the recorder. When you switch on for the first time, your TV should display the Setup Navigator screen (If the Setup Navigator doesn't appear, you can also access it from the Initial Setup menu; see page 110). 4 ENTER Start the Setup Navigator. k Setting t LineCSoymstpelmete this setup before you start using your recorder. er Save P Start p Navigator Cancel Please use the Initial Setup if you want to make more detailed settings. • If you don't want to use the Setup Navigator, press to select Cancel, then press ENTER to exit the Setup Navigator. ENTER 5 Select the 'Auto Scan' then press ENTER. k SAetuttiongChannel Setting Line System er Save AEnugtolisShcan P Do not Set • Select Do not set if you want to skip channel setup (because they have already been set up, for example). 28 En