Pioneer DVR340 Operating Instructions - Page 34

05 Recording Using the built-in TV tuner There are three different ways to select TV channels. Note that you can't change the TV channel during playback, recording or during recording standby. CH • CH +/- buttons ABC DEF GHI JKL MNO PQRS TUV WXYZ CLEAR • CLEAR Number buttons For example, to select channel 4, press 4 then ENTER; for channel 34, press 3, 4, ENTER.1 • CH +/- buttons on the front panel Changing audio channels You can change the audio channel of the broadcast or external input signal. AUDIO • Press to change the audio type. The current audio channel is displayed on- screen. • If the NICAM audio setting (see NICAM Select on page 112) is set to NICAM and you are watching a NICAM broadcast, you can switch between NICAM and Regular (non-NICAM) audio. NICAM Regular • If the NICAM broadcast is bilingual, you can also select the language. NICAM A NICAM B Regular NICAM A+B Note 1 Channel presets are numbered 1 to 99. 34 En • You can also select the language for a non-NICAM bilingual broadcast. A (L) B (R) A + B (L+R) • When watching a recording made from an external input with Bilingual recording selected (see External Audio on page 113), you can switch the audio channel between left (L), right (R) or both (L+R). L R L+R Note • When recording to the HDD with HDD Recording Format set to Video Mode On, to DVD in Video mode, or on the LPCM setting, only one channel of a bilingual broadcast is recorded. In this case, decide which language you want to record before recording by setting the Bilingual Recording setting (see Bilingual Recording on page 113).