Pioneer DVR340 Operating Instructions - Page 19

Connecting up 02 Connecting to a cable box or satellite receiver (2) If many or all the channels you receive by cable or satellite are scrambled, we recommend using this setup.1 Using the setup on this page you can: • Record any channel by selecting it on the cable box/satellite receiver. • Record using the Auto Start Recording feature (see Automatic recording from a satellite tuner on page 46). Important • Do not connect this recorder 'through' your VCR, satellite receiver or cable box. Always connect each component directly to your TV or AV amp/receiver. 1 Connect RF antenna cables as shown. This enables you to watch and record TV channels. 2 Connect the AUDIO and VIDEO OUTPUT jacks (1 or 2) on this recorder to a set of audio/video inputs on your TV using a set of A/V cables (as supplied). This enables you to watch discs. 3 Connect the audio/video output of your cable box/satellite receiver to the INPUT jacks on this recorder using a set of A/V cables. This enables you to record scrambled TV channels. AUDIO/VIDEO INPUT 2 TV AC IN DIGITAL CONTROL OUT COAXIAL IN ANTENNA IN 1 ANTENNA OUT Y OUTPUT 1 R L PB INPUT 1/OAUUTTPOUSTT1ART REC R L PR COMPONENT VIDEO OUT AUDIO OUTPUT 2 VIDEO S-VIDEO AUDIO VIDEO S-VIDEO INPUT 3 IN OUT ANTENNA ANTENNA IN (RF IN) 3 AUDIO/VIDEO OUTPUT 1 1 ANTENNA OUT Cable box/ Satellite receiver ANTENNA IN Antenna/cable TV wall outlet Note 1 • The setup on this page does not allow you to watch one channel and record another. • The diagram shows standard video connections, but you can alternatively use the S-video or component video connections if they're available. 19 En