Pioneer DVR340 Operating Instructions - Page 39
the Easy Timer Recording screen.
View all Pioneer DVR340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Recording 05 7 Move the cursor to the recording end time on the grid. Recording start time Recording end time Easy Timer Recording 11:00 1/01 2/01 3/01 12:00 13:00 14:00 15:00 16:00 17:00 SAT 1/01 11:45 - 13:45 Pr 7 REC MODE SP HDD/DVD HDD As you move the cursor around the grid, an arrow stretches from the start time to the current cursor position, representing the length of the recording. A recording of up to six hours can be set. ENTER 8 Set the end time. 9 Select 'Yes' to set the timer recording and exit, or 'No' to go back to the Easy Timer Recording screen. • You can check the timer recording details you just set from the main timer recording screen (see Setting a manual timer recording on page 41). Timer recording using the GCode™ programming system This system makes programming timer recordings very simple. Most TV guides publish G-Code programming numbers with their program details. If you want to make a timer recording of a program, you just input the corresponding code. The date, start, stop and channel settings are made automatically. All you have to do is tell the recorder the recording mode, and whether it's a once-only recording or a regular recording. Note that if the country setting is incorrect (set in the Setup Navigator), timer recordings made using the G-Code programming system may not work as expected. 1 Press 'G-Code' to display the G-Code program screen. You can also access this screen from the Home Menu (press HOME MENU, select Timer Recording, then G-Code system). G-Code# 1 2 3 4 5 6 7 8 9 0 Clear Cancel Detail Enter • Use the number buttons to enter the GCode programming number. (To clear the last digit entered, press CLEAR.) • You can also use the / / / buttons to select digits from the onscreen display. 2 After making the settings, select 'Enter' and press ENTER. The timer recording screen appears with the timer program you just set. 3 Confirm that the settings are correct. If the channel number isn't displayed, use the / buttons to highlight CH, then use the / buttons to set the correct channel number. 39 En