Pioneer FH-P800BT Owner's Manual - Page 15
Introduction to advanced, operations, Storing the strongest broadcast, frequencies, Tuning in strong - change radio frequency
UPC - 012562886657
View all Pioneer FH-P800BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Operating this unit Section 02 Operating this unit 3 Use MULTI-CONTROL to select the desired station. Turn to change the station. Press to select. # You can also change the station by pushing MULTI-CONTROL up or down. # To return to the ordinary display, press BAND or LIST. # If you do not operate the list within about 30 seconds, the display automatically returns to the ordinary display. Using the remote control % When you find a frequency that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing. The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory. The next time you press the same preset tuning button the radio station frequency is recalled from memory. # You can also recall radio station frequencies assigned to preset tuning numbers by pushing MULTI-CONTROL up or down during the frequency display. Introduction to advanced operations 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select FUNCTION. Turn to change the menu option. Press to select. The function menu is displayed. 3 Turn MULTI-CONTROL to select the function. BSM (best stations memory)-LOCAL (local seek tuning) Notes ! You can also select the function by pressing FUNCTION on the remote control. ! To return to the ordinary display, press BAND. Storing the strongest broadcast frequencies BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies. 1 Display the function menu. Refer to Introduction to advanced operations on this page. 2 Use MULTI-CONTROL to select BSM in the function menu. 3 Press MULTI-CONTROL to turn BSM on. The six strongest broadcast frequencies are stored in the order of their signal strength. # To cancel, press MULTI-CONTROL again. Tuning in strong signals Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Display the function menu. Refer to Introduction to advanced operations on this page. 2 Use MULTI-CONTROL to select LOCAL in the function menu. 3 Press MULTI-CONTROL to turn local seek tuning on. # To turn local seek tuning off, press MULTI-CONTROL again. 4 Push MULTI-CONTROL left or right to set the sensitivity. FM: LEVEL 1-LEVEL 2-LEVEL 3-LEVEL 4 AM: LEVEL 1-LEVEL 2 En 15