Pioneer FH-P800BT Owner's Manual - Page 65

Available accessories Section 06 Available accessories Multi-CD Player Basic Operations You can use this unit to control a multi-CD player, which is sold separately. ! Only functions described in this manual are supported by 50-disc multi-CD players. ! This unit is not designed to operate disc title list functions with a 50-disc multi-CD player. For information about the disc title list functions, refer to Selecting discs from the disc title list on page 68. 1 Disc number indicator 2 Track number indicator 3 Play time indicator % Select a disc Push MULTI-CONTROL up or down. # You can also select a disc by using 1 to 6 buttons on the remote control. ! For discs 1 to 6, press the corresponding button number. ! For discs 7 to 12, press and hold the corresponding numbers, such as 1 for disc 7, until the disc number appears in the display. % Fast forward or reverse Push and hold MULTI-CONTROL left or right. % Select a track Push MULTI-CONTROL left or right. Notes ! When multi-CD player completes preparatory operations, READY is displayed. ! If an error message such as ERROR-11 is dis- played, refer to the multi-CD player owner's manual. ! If there are no discs in the multi-CD player magazine, NO DISC is displayed. Using CD TEXT functions You can use these functions only with a CD TEXT compatible multi-CD player. The operation is the same as that of the builtin CD player. Refer to Displaying text information on disc on page 17. Introduction to advanced operations You can only use COMPRESSION (compression and DBE) with a multi-CD player that supports them. 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select FUNCTION. Turn to change the menu option. Press to select. The function menu is displayed. 3 Turn MULTI-CONTROL to select the function. PLAY MODE (repeat play)-RANDOM MODE (random play)-SCAN MODE (scan play)- PAUSE (pause)-COMPRESSION (compression and DBE)-ITS PLAY MODE (ITS play)- ITS MEMO (ITS programming)-TITLE INPUT (disc title input) # If you do not operate functions other than ITS MEMO and TITLE INPUT within about 30 seconds, the display automatically returns to the ordinary display. # When playing a CD TEXT disc on a CD TEXT compatible multi-CD player, you cannot switch to TITLE INPUT. The disc title is already recorded on the CD TEXT disc. En 65