Pioneer FH-P800BT Owner's Manual - Page 58

Section 06 Available accessories Selecting an XM channel directly When using the remote control, you can select the XM channel directly by entering the desired channel number. 1 Press DIRECT. Channel number input display appears. 2 Press 0 to 9 to enter the desired channel number. # You can cancel the input number by pressing CLEAR. 3 Press DIRECT. The XM channel of entered number is selected. # After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled. Switching the XM display % Press DISP to switch the XM display. # You can scroll the text information to the left by pressing and holding DISP. Storing and recalling broadcast stations You can easily store up to six broadcast stations for later recall. ! Six stations for each band can be stored in memory. 1 Press LIST. Preset screen is displayed. 2 Use MULTI-CONTROL to store the selected station in memory. Turn to change the preset number. Press and hold to store. The XM preset number you have selected will flash and then remain lit. The selected station has been stored in memory. 3 Use MULTI-CONTROL to select the desired station. Turn to change the station; press to select. # You can also change the station by pushing MULTI-CONTROL up or down. # If you do not operate the list within about 30 seconds, the display is automatically returned to the ordinary display. Using the remote control % When you find a station that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the XM preset number stops flashing. The number you have pressed will flash in the XM preset number indicator and then remain lit. The selected station has been stored in memory. The next time you press the same preset tuning button the station is recalled from memory. # You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down. Switching the XM channel select mode You have two methods for selecting a channel: by number and by category. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to only channels in a particular category. % Press SAT MODE repeatedly to select the desired channel select setting. CHANNEL NUMBER (channel number select setting)-CATEGORY (channel category select setting) Note You can also perform this operation in the menu that appears by using MULTI-CONTROL. 58 En