Pioneer FH-P800BT Owner's Manual - Page 59

Available accessories Section 06 Available accessories Selecting a channel in the channel category 1 Select the channel select settings to CATEGORY. Refer to Switching the XM channel select mode on the previous page. 2 Push MULTI-CONTROL up or down to select the desired channel category. 3 Push MULTI-CONTROL left or right to select the desired channel in the selected channel category. SIRIUS Satellite Radio tuner Listening to SIRIUS Satellite Radio You can use this unit to control a SIRIUS Satellite Radio tuner, which is sold separately. When the SIRIUS tuner is used together with this unit, some operations differ slightly from those described in the SIRIUS operation manual. This manual provides information on these points. For all other information on using the SIRIUS tuner, please refer to the SIRIUS operation manual. Displaying the Radio ID Channel number select setting 1 Select the channel select settings to CHANNEL NUMBER. Refer to Switching the XM channel select mode on the previous page. 2 Push MULTI-CONTROL left or right to select RADIO ID. # If you select another channel, display of the ID code is canceled. # Display of the ID code repeats displaying RADIO ID and the ID code one after the other. 1 SIRIUS band indicator 2 SIRIUS preset number indicator 3 SIRIUS channel number indicator 4 SIRIUS channel name Shows the channel name of broadcast channel. % Select a SIRIUS band. Press BAND. # Band can be selected from SR1, SR2 or SR3. % Select a channel. Push MULTI-CONTROL left or right. # If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel number continuously. # You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel category on page 61.) Note It may take a few seconds before you can hear anything while this unit acquires and processes the satellite signal when you change the source to SIRIUS tuner or select a channel. En 59