Pioneer HTP-710 Operating Instructions - Page 24

01 Speaker Setup (HTP-FS510) Chapter 1-3 Speaker Setup (HTP-FS510) Safety precautions when setting up When assembling the speakers, lay them down flat on their side to avoid accidents or injury. Make sure to use a stable surface when assembling, setting up, and placing the speakers. 2 Insert the pole from the holes behind the base and secure with the 4 screws. Home theater sound setup This is a standard speaker setup. The front left and right speakers should be about 1.8 m to 2.7 m apart. Front left Front right Subwoofer Preparing the speakers 1 Attach the non-skid pads to the base of receiver subwoofer. Use the supplied adhesive to attach four pads to the base of subwoofer. Non-skid pads CAUTION • Be careful not to tighten screws excessively. • If excessive force is used to tighten screws, the threads of screw and/or nut may be damaged. Use a middle-sized manual screwdriver during assembly. • Do not use power screwdrivers or oversized screwdrivers that may exert excessive force on the screws and nuts. • Confirm that no foreign matter is stuck to the stand base or the tall speaker during assembly. • If the unit is assembled with foreign matter stuck between the stand base and the tall speaker the unit may not be assembled securely, resulting in tipping or falling. 3 Affix the gasket to the pole. Affix the gasket to the surface of the pole where the speaker will be mounted. 24 En