Pioneer HTP-710 Operating Instructions - Page 74

08 The System Setup menu 1 Select 'Channel Level' from the Manual SP 5 When you're finished, press RETURN. Setup menu. You return to the Manual SP Setup menu. 2.Manual SP Setup a.Speaker Setting b.Channel Level c.Speaker Distance 2b.Channel Level Test Tone Manual Return ENTER:Next Return 2 Select a setup option. • Manual - Move the test tone manually from speaker to speaker and adjust individual channel levels. • Auto - Adjust channel levels as the test tone moves from speaker to speaker automatically. 3 Confirm your selected setup option. The test tones will start after you press ENTER. After the volume increases to the reference level, test tones will be output. 2b.Channel Level Test Tone [ Manual ] Please Wait . . .20 Caution Loud test tones will be output Return 4 Adjust the level of each channel using /. If you selected Manual, use / to switch speakers. The Auto setup will output test tones in the order shown on-screen: 2b.Channel Level Front L Center [ Front R [ Surround R [ Surr. Back R [ Surr. Back L [ Surround L [ Subwoofer [ 0dB 0dB] 0dB] 0dB 0dB] 0dB] Return Tip • You can change the channel levels at any time by press , then press CH SELECT and +/- on the remote control. You can also press CH SELECT and use / to select the channel, and then use / to adjust the channel levels. Speaker Distance For good sound depth and separation from your system, you need to specify the distance of your speakers from the listening position. The system can then add the proper delay needed for effective surround sound. 1 Select 'Speaker Distance' from the Manual SP Setup menu. 2.Manual SP Setup a.Speaker Setting b.Channel Level c.Speaker Distance Return 2c.Speaker Distance Front L Center Front R Surround R Surr. Back R Surr. Back L Surround L Subwoofer 3.0 m [ 3.0 m ] [ 3.0 m ] [ 3.0 m ] [ ---- ] [ ---- ] [ 3.0 m ] [ 3.0 m ] Return 2 Adjust the distance of each speaker using /. You can adjust the distance of each speaker in 0.1 m increments. 3 When you're finished, press RETURN. You return to the Manual SP Setup menu. Adjust the level of each speaker as the test tone is emitted.1 Note 1 • If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust the level of each speaker to 75 dB SPL (C-weighting/slow reading). • The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual soundtrack. 74 En