Pioneer HTP-710 Operating Instructions - Page 70

07 Listening to your system Setting What it does Option(s) DUAL MONOd Specifies how dual mono encoded Dolby Digital soundtracks should be played. CH1 - Channel 1 is heard only CH2 - Channel 2 is heard only CH1 CH2 - Both channels heard from front speakers DRC (Dynamic Range Control) Adjusts the level of dynamic range for movie soundtracks optimized for Dolby Digital, DTS, Dolby Digital Plus, Dolby TrueHD, DTS-HD and DTS-HD Master Audio (you may need to use this feature when listening to surround sound at low volumes). AUTOe MAX MID OFF LFE ATT (LFE Attenuate) Some Dolby Digital and DTS audio sources include ultra-low bass tones. Set the LFE attenuator as necessary to prevent the ultra-low bass tones from distorting the sound from the speakers. The LFE is not limited when set to 0 dB, which is the recommended value. When set to -10 dB, the LFE is limited by the respective degree. When OFF is selected, no sound is output from the LFE channel. LFEATT 0 (0 dB) LFEATT 10 (-10 dB)/ LFEATT ** (OFF) HDMI (HDMI Audio) Specifies the routing of the HDMI audio signal out of AMP this system (amp) or through to a TV. When THRU is selected, no sound is output from this system. THRU A.DLY (Auto Delay) This feature automatically corrects the audio-to-video OFF delay between components connected with an HDMI cable. The audio delay time is set depending on the ON operational status of the display connected with an HDMI cable. The video delay time is automatically adjusted according to the audio delay time.f C.WIDTHg (Center Width) (Applicable only Spreads the center channel between the front right and left speakers, making it sound wider (higher settings) or narrower (lower settings). when using a center speaker) 0 to 7 Default: 3 DIMEN.g (Dimension) Adjusts the surround sound balance from front to back, making the sound more distant (minus settings), or more forward (positive settings). -3 to +3 Default: 0 70 En