Pioneer PRO-910HD Owner's Manual - Page 21
When the speakers are installed on the sides
View all Pioneer PRO-910HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Preparation 07 Routing cables Speed clamps and bead bands are included with this system for bunching cables. Once properly bunched, follow the steps below to route the cables. When the speakers are installed on the sides (rear view) Speaker cable Cable binders (supplied Speed clamps with the stand)* Speaker cable Attaching speed clamps to the main unit Attach the speed clamps using the 4 holes marked with below, depending on your routing system. Attaching and removing speed clamps Insert 1 into an appropriate hole on the rear of the Plasma Display and snap 2 into the back of 1 to lock the clamp. Speed clamps are designed to be difficult to undo once in place. Please attach them carefully. Use pliers to twist the clamp 90°, pulling outward. The clamp may deteriorate over time and become damaged if removed. 2 1 When the speakers are installed at the bottom PDP-ELITE-Eng (17-27) Speaker cable Cable binders (supplied with the stand)* Speaker cable * Cable binder Using the cable binders supplied with the stand, put the speaker and system cables together so that the cables are invisible from the front. At that time be careful not to apply any force to the connection sections of the cables. 21 En 21 9/9/03, 11:44