Pioneer PRO-910HD Owner's Manual - Page 74
To change the name of a device
View all Pioneer PRO-910HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
11 Enjoying through External Equipment Operating the control panel screen The control panel screen appears when you press i.LINK. It disappears when you press i.LINK again. To select a button on the control panel screen, press / or / , and then press ENTER on the remote control. 12 3 @ #$ % 00:00:00 Name Status(Play) D i.LINK/DTV ~ Device ! 4 56 7 890 - = 1 Shows the model and manufacture name of the D-VHS recorder to be operated. 2 Shows counter time output by the D-VHS recorder. 3 Shows the current status of the D-VHS recorder. 4 Switches on and off the D-VHS recorder. 5 Starts recording. 6 Rewinds the tape. 7 Rewinds to the start of the current program. 8 Pauses the tape. 9 Starts playing back. 0 Stops the current tape motion. - Forwards the tape. = Forwards to the start of the next program. ~ Switches the input source between i.LINK and DTV. ! Allows you to change the D-VHS recorder to be operated. After pressing this button, press / to select the desired model from the list, and then press ENTER. @ Shows the type of inserted video tape; D for D-VHS, S for S-VHS, and no display for VHS. # Appears when any tape has been inserted. $ Appears when the inserted tape has been write protected. The inserted tape cannot be used for recording when this indicator appears. % Appears when the D-VHS recorder has been preset for recording and is in the standby mode. • If no i.LINK device has been connected, "No i.LINK devices are connected." appears. If this is the case, connect i.LINK devices. • If none of the connected equipment has been supported for control, you cannot execute control. Editing the i.LINK list The i.LINK list shows all devices connected through i.LINK interfaces. In this list, you can change the name or order of devices or delete device information. To change the name of a device: 1 Press / to select the desired device from the list, and then press ENTER. 2 Press / to select "Rename", and then press ENTER. i.LINK Setting D-VHS1 Connect Rename Replace Delete ****** ****** Connected 3 Press / to change the character for the first digit. Rename D-VHS1 ****** Input the device name. ****** D Connected OK Cancel • You can select A to Z, 0 to 9, special codes, and space in the order. 4 Press / to move the cursor to the second digit. 5 Press / to change the character for the second digit. 6 Repeat steps 3 and 4 to enter up to eight digits, and then press ENTER. 7 Press / to select OK, and then press ENTER. 74 En PDP-ELITE-Eng (65-80) 74 9/9/03, 11:46