Pioneer PRO-910HD Owner's Manual - Page 34
Using CH, on the remote control unit, Using CH RETURN on the remote control unit, EXAMPLE
View all Pioneer PRO-910HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
08 Basic Operations Plasma Display (right view) CHANNEL +/- Channel display 8 AAA STEREO STANDARD FULL Watching digital TV channels Unless you set up digital TV channels that you can watch under the current conditions, you cannot tune in those channels. For the procedure, see "Setting up digital TV channels" on page 44. Selecting the digital TV input After confirming that the Mode switch on the remote control unit has been set to "TV", press DTV on the remote control unit to select the input source for digital TV channels. Changing channels Using CH +/- on the remote control unit • Press CH + to increase the channel number. • Press CH - to decrease the channel number. • CHANNEL +/- on the Plasma Display operates the same as CH +/-. Using CH RETURN on the remote control unit Press CH RETURN to switch the currently tuned channel to the previously tuned channel. Press CH RETURN again to switch back to the currently tuned channel. Using 0 - 9 and • (dot) on the remote control unit Select channels directly by pressing buttons 0 to 9. To select subchannels, also use the • (dot) button. EXAMPLE • To select channel 5 (1-digit channel), press 5. • To select channel 25 (2-digit channel), press 2, followed by 5. • To select channel 125 (3-digit channel), press 1, then 2, followed by 5. • To select subchannel 2.1, press 2, • (dot), then 1. • To select subchannel 10.1, press 1, 0, • (dot), then 1. • After entering a channel or subchannel number, you may press CH ENTER to tune in the channel more quickly. 34 En PDP-ELITE-Eng (28-37) 34 9/9/03, 11:44