Pioneer PRO-910HD Owner's Manual - Page 97
Useful Features
![]() |
View all Pioneer PRO-910HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Useful Features 13 Learning function of the remote control unit You can operate the connected AV products (AV Receiver, Cable Box, SAT tuner, VCR, DVD, DVD recorder, LD) using the learning function of your remote control unit. This remote control unit has a function that can memorize each remote control code. 2 to 5 cm (0.8 to 2.0 inches) Using the learning function 1 Slide the Mode switch to match the device whose remote control signal you want to be learned. 2 Press EDIT/LEARN and 2 at the same time. •The LED flashes. 3 Press a button to be learned. • The LED lights up. • For the functions that can be learned, see pages 100 to 105. • When learning is finished, the LED starts flashing again. 4 Press EDIT/LEARN again to exit the Learn mode. Remote control (Supplied accessory) Remote control of AV product • To exit the Learn mode halfway, press EDIT/LEARN again. • If the Mode switch selection is changed when in the Learn mode, the Learn mode is cancelled. • If no operation is performed for more than one minute, the Learn mode is cancelled. • It takes about 2 seconds to finish code transmission. Do not interrupt it halfway. Wait until the LED flashes again. • You can reset all learned codes to the factory defaults. When not in the Learn mode, press and hold TVa, and then press D and k at the same time. PDP-ELITE-Eng (97-105) 97 97 En 9/9/03, 11:47
![](/manual_guide/products/pioneer-pro1110hd-owners-manual-98af9a8/97.png)