Pioneer PRO-910HD Owner's Manual - Page 98
Mode switch, EDIT/LEARN
View all Pioneer PRO-910HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
13 Useful Features Presetting manufacture codes 1 Slide the Mode switch to match the device to which you want to preset the remote control signal. 2 Press EDIT/LEARN and 1 at the same time. • The LED flashes. 3 Press 0 - 9 to enter the manufacture code. See page 99. • Preset mode is finished once the LED no longer lights up. • To exit the Edit mode halfway, press EDIT/LEARN again. • If the Mode switch selection is changed when in the Edit mode, the Edit mode is cancelled. • If no operation is performed for more than one minute, the Edit mode is cancelled. • When you enter a code not listed, the LED flashes quickly. • If the table on page 99 does not include your desired manufacturer or the remote control does not work, you can make the memory learn its signal by the Learn mode. • The initial mode is "000" (PIONEER). 98 En PDP-ELITE-Eng (97-105) 98 9/9/03, 11:47