Pioneer SC-LX501 Basic Manual English/French - Page 29
Display
View all Pioneer SC-LX501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
> Before start > Hookup > Setup > Playback > Part Names microphone is connected. 23.PHASE CONTROL button: This turns on or off the Phase Control that corrects phase disturbance in the low range to enhance the bass. 24.USB port: A USB storage device is connected so that music files stored in it can be played. You can also supply power (maximum 5V/1A) to USB devices with a USB cable. 25.AUX INPUT HDMI jack: Connect to a video camera, etc., using a HDMI cable. 26.DIMMER button: You can adjust the brightness of the display in four steps. 27.Front flap Display 1 2 3 4 5 67 8 9 10 1. Lights when operating the "NET", "USB" input selector indicating remote controller cursor operations are possible in screens showing list of tracks, for example. 2. Lights in the following conditions. Z2: When ZONE 2 is on. : When connected by BLUETOOTH. : When connected by Wi-Fi. NET: When "NET" is selected with the input selector and the unit is connected to the network. It will flash if the connection to the network is not correct. USB: When "USB" is selected with the input selector and the unit is connected by USB and the USB device is selected. Flashes if the USB is not properly connected. HDMI: When HDMI signals are input and the HDMI input is selected. DIGITAL: When digital signals are input and the digital input is selected. 3. Lights according to the type of input digital audio signals and the listening mode. 4. Lights in the following conditions. RDS (European and Asian models): Receiving RDS broadcasting. TUNED: Receiving AM/FM radio. STEREO: Receiving FM stereo. SLEEP: When the sleep timer is set. AUTO STBY: When Auto Standby function is enabled. 5. The currently selected speaker system lights. 6. Lights when headphones are connected. 7. Flashes when muting is on. 8. Displays various information of the input signals. Characters that cannot be displayed on this unit are replaced with asterisks ( ˎ ). 9. Lights when adjusting the volume. 10.Speaker/Channel display: Displays the output channel that corresponds to the selected listening mode. En 29