Pioneer VSX-21 Operating Instructions - Page 17
SPEAKER setting mode
UPC - 012562957067
View all Pioneer VSX-21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
SET UP Preparations SPEAKER setting mode Establishes the size and configuration of the speaker system you have connected. In the display, "F", "C", and "S" refer to front, center, and surround speakers respectively. Speaker size is denoted as ∗ "L" for large speakers, "S" for small speakers, and " " (asterisk) if no speaker is connected. memo If the cone size of your speaker is larger than 5 in. (12 cm), please set to Large. SIGNAL SP A SELECT ANALOG dB 1 Press % or fi to set the front speaker. 2 Front speaker (initial setting is "L (Large)") • Select "FL" if your speakers will reproduce bass frequencies effectively or if you did not connect a sub woofer. • Select "FS" to send bass frequencies to the sub woofer. (The center and surround speakers cannot be set to Large if the front speakers are set to Small. In this case, all bass frequencies are sent to the sub woofer.) 2 SIGNAL SP A SELECT ANALOG 2 Press % or fi to set the center speaker. dB 2 Center speaker (initial setting is "L (Large)") • Select "CL" if your speaker will reproduce bass frequencies effectively. • Select "CS" to send bass frequencies to the other speakers or sub woofer. ∗ • Select "C " if you did not connect a center speaker. In this case, the center channel is output from the front speakers. 2 SIGNAL SELECT ANALOG SP A dB * Press ⁄ to advance to the next setting, and press ! to return to previous setting. 3 Press % or fi to set the surround speaker. Surround speaker (initial setting is "L (Large)") • Select "SL" if your speakers will reproduce bass frequencies effectively. • Select "SS" to send bass frequencies to the other speakers or sub woofer. ∗ • Select "S " if you did not connect surround speakers. In this case, the sound of the surround channels is output from the front and center speakers. 17