Pioneer VSX-21 Operating Instructions - Page 21

SET UP Preparations Optical digital input 3 setting Sets the input component to be assigned to the optical input 3 jack. memo • Initial setting is "TV". • You cannot assign the same component to more than one digital input jack. The jack most recently selected is established for the component and the jack formerly selected is turned off. • DVD/LD, TV/SAT, CD, MD/TAPE, VCR 1 digital input connection is possible. SIGNAL SP A SELECT ANALOG Press % or fi to set the optical digital input 3 (DVD, TV, CD, dB MD, VCR 1). Setting the volume level of each channel (Adjusting the speaker volume balance) memo • Sound from the SUB WOOFER seems quiet. • The speaker volume can be adjusted without outputting the test tone by pressing CHANNEL LEVEL or CHANNEL SELECT . • Initial setting is 0 dB. RECEIVER TV 1 Press . MUTING FQ TV FUNC + ENTER 2 Press VOL + or - to adjust the volume to an appropriate level. - FQ VOL VOL CHANNEL MULTI CONTROL DVD/LD TV/SAT CD VCR 1 TVCONTROL TUNER 2 3 Press TEST TONE to output the test tone. The test tone is output in the following order. FL CT FR VCR 2 RECEIVER MD/TAPE SW SL SR 1 DSP MODE MIDNIGHT 12 34 CH.SELECT TEST TONE ATT SIG.SELECT 56 7 8 3,5 memo • Test tone is only output in Dolby/DTS mode. 4 CN.LEVEL 90 EFFECT +10 MEMU CLASS TV/VCR FUNCTION DIRECT FL DIMMER MODE CHECK COMMANDER SET UP 4 Adjust speaker levels so that you hear the test tone at Î AUDIO/VIDEO PRE-PROGRAMMED REMOTE CONTROL UNIT the same volume from each speaker when seated in the main listening position. The channel level ranges ± 10 dB. memo • Levels can be set for each surround mode. 5 Press TEST TONE to turn off the test tone. 21