Pioneer VSX-53TX Owner's Manual - Page 106

Specifications - watt

Page 106 highlights

Techno Tidbits and Problem-solving Specifications Amplifier Section Continuous average power output of 100 watts* per channel, min., at 8 ohms, from 20 Hz to 20,000 Hz with no more than 0.09%** total harmonic distortion (front). Continuous Power Output Front 100 W +100 W (20 Hz - 20 kHz, 0.09%, 8 Ω) Center 100 W (20 Hz - 20 kHz, 0.09%, 8 Ω) Surround...... 100 W +100 W (20 Hz - 20 kHz, 0.09%, 8 Ω) Surround Back 100 W +100 W (20 Hz - 20 kHz, 0.09%, 8 Ω) Video Section (Composite) Input (Sensitivity/Impedance) LINE 1 Vp-p/75 Ω Output (Level/Impedance) LINE 1 Vp-p/75 Ω Frequency Response LINE 5 Hz to 10 MHz +0 -3 dB Signal-to-Noise Ratio 65 dB FM Tuner Section Frequency Range 87.5 MHz to 108 MHz Usable Sensitivity Mono: 13.2 dBf, IHF (1.3 µV/75 Ω) Audio Section Input (Sensitivity/Impedance) LINE 335 mV/47 kΩ Frequency Response LINE 5 Hz to 100,000 Hz +0 -3 dB Output (Level/Impedance) LINE 335 mV/2.2 kΩ Tone Control BASS 6 dB (100 Hz) TREBLE 6 dB (10 kHz) LOUDNESS 4/+2 dB (100Hz/10 kHz) (at volume position -40dB) Signal-to-Noise Ratio (IHF, short circuited, A network) LINE 101 dB Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)] LINE 83 dB * Measured pursuant to the Federal Trade Commission's Trade Regulation rule on Power Output Claims for Amplifiers. ** Measured by Audio Spectrum Analyzer. 50 dB Quieting Sensitivity Mono: 20.2 dBf Stereo: 38.6 dBf Signal-to-Noise Ratio Mono: 73 dB (at 85 dBf) Stereo: 70 dB (at 85 dBf) Distortion Stereo: 0.5 % (1 kHz) Alternate Channel Selectivity 60 dB (400 kHz) Stereo Separation 40 dB (1 kHz) Frequency Response 30 Hz to 15 kHz (± 1) dB Antenna Input 75 Ω unbalanced AM Tuner Section Frequency Range 530 kHz to 1,700 kHz Sensitivity (IHF, Loop antenna 350 µV/m Selectivity 25 dB Signal-to-Noise Ratio 50 dB Antenna Loop antenna Miscellaneous Power Requirements AC 120 V, 60 Hz Power Consumption 600 W Video Section (S jack) Input (Sensitivity/Impedance 1 Vp-p/75 Ω Output (Level/Impedance 1 Vp-p/75 Ω Frequency Response 5 Hz to 10 MHz +0 -3 dB Signal-to-Noise Ratio 65 dB Component Video Section Input (Sensitivity 1 Vp-p/75 Ω Output (Level/Impedance 1 Vp-p/75 Ω Frequency Response 5 Hz to 40 MHz +0 -3 dB Signal-to-Noise Ratio 65 dB Power Consumption in Standby mode 0.8 W AC Outlet SWITCHED 100 W (0.8 A) MAX Dimensions 420 (W) × 188 (H) × 464 (D) mm (16-9/16 (W) × 7-7/16 (H) × 18-5/16 (D) in.) Weight (without package 17.4 kg (38.6 lbs) Furnished Parts FM wire Antenna 1 AM loop Antenna 1 "AA" IEC LR6 batteries 2 Remote Control Unit 1 Microphone for Auto Surround Sound Setup 1 Microphone Stand for Auto Surround Sound Setup 1 Operating Instructions 1 NOTE: Specifications and the design are subject to possible modifi- cations without notice, due to improvements. 106

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107

Techno Tidbits and Problem-solving
106
Specifications
Amplifier Section
Continuous average power output of
100 watts* per channel, min., at 8 ohms,
from 20 Hz to 20,000 Hz with no more
than 0.09%** total harmonic distortion
(front).
Continuous Power Output
Front
.............
100 W +100 W (20 Hz – 20 kHz, 0.09%, 8
)
Center
.........................
100 W (20 Hz – 20 kHz, 0.09%, 8
)
Surround
......
100 W +100 W (20 Hz – 20 kHz, 0.09%, 8
)
Surround Back
...............
100 W +100 W (20 Hz – 20 kHz, 0.09%, 8
)
Audio Section
Input (Sensitivity/Impedance)
LINE
.................................................................
335 mV/47 k
Frequency Response
LINE
..............................................
5 Hz to 100,000 Hz
+
0
3
dB
Output (Level/Impedance)
LINE
................................................................
335 mV/2.2 k
Tone Control
BASS
...........................................................
± 6 dB (100 Hz)
TREBLE
.......................................................
± 6 dB (10 kHz)
LOUDNESS
................................
+4/+2 dB (100Hz/10 kHz)
(at volume position –40dB)
Signal-to-Noise Ratio (IHF, short circuited, A network)
LINE
............................................................................
101 dB
Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)]
LINE
..............................................................................
83 dB
*
Measured pursuant to the Federal Trade Commission’s
Trade Regulation rule on Power Output Claims for
Amplifiers.
**
Measured by Audio Spectrum Analyzer.
Video Section (S jack)
Input (Sensitivity/Impedance)
...............................
1 Vp-p/75
Output (Level/Impedance)
.....................................
1 Vp-p/75
Frequency Response
............................
5 Hz to 10 MHz
+
0
3
dB
Signal-to-Noise Ratio
.......................................................
65 dB
Component Video Section
Input (Sensitivity)
..................................................
1 Vp-p/75
Output (Level/Impedance)
.....................................
1 Vp-p/75
Frequency Response
............................
5 Hz to 40 MHz
+
0
3
dB
Signal-to-Noise Ratio
.......................................................
65 dB
Video Section (Composite)
Input (Sensitivity/Impedance)
LINE
....................................................................
1 Vp-p/75
Output (Level/Impedance)
LINE
....................................................................
1 Vp-p/75
Frequency Response
LINE
...................................................
5 Hz to 10 MHz
+
0
3
dB
Signal-to-Noise Ratio
.......................................................
65 dB
FM Tuner Section
Frequency Range
...................................
87.5 MHz to 108 MHz
Usable Sensitivity
..............
Mono: 13.2 dBf, IHF (1.3 μV/75
)
50 dB Quieting Sensitivity
................................
Mono: 20.2 dBf
Stereo: 38.6 dBf
Signal-to-Noise Ratio
.........................
Mono: 73 dB (at 85 dBf)
Stereo: 70 dB (at 85 dBf)
Distortion
.................................................
Stereo: 0.5 % (1 kHz)
Alternate Channel Selectivity
.........................
60 dB (400 kHz)
Stereo Separation
................................................
40 dB (1 kHz)
Frequency Response
........................
30 Hz to 15 kHz (± 1) dB
Antenna Input
...............................................
75
unbalanced
AM Tuner Section
Frequency Range
....................................
530 kHz to 1,700 kHz
Sensitivity (IHF, Loop antenna)
.................................
350 μV/m
Selectivity
.........................................................................
25 dB
Signal-to-Noise Ratio
.......................................................
50 dB
Antenna
...............................................................
Loop antenna
Miscellaneous
Power Requirements
.......................................
AC 120 V, 60 Hz
Power Consumption
........................................................
600 W
Power Consumption in Standby mode
...........................
0.8 W
AC Outlet SWITCHED
................................
100 W (0.8 A) MAX
Dimensions
........................
420 (W) × 188 (H) × 464 (D) mm
(16-9/16 (W) × 7-7/16 (H) × 18-5/16 (D) in.)
Weight (without package)
.............................
17.4 kg (38.6 lbs)
Furnished Parts
FM wire Antenna
.....................................................................
1
AM loop Antenna
.....................................................................
1
“AA” IEC LR6 batteries
............................................................
2
Remote Control Unit
................................................................
1
Microphone for Auto Surround Sound Setup
.......................
1
Microphone Stand for Auto Surround Sound Setup
............
1
Operating Instructions
............................................................
1
NOTE:
Specifications and the design are subject to possible modifi-
cations without notice, due to improvements.