Pioneer VSX-53TX Owner's Manual - Page 92
TRIM and press ENTER.
View all Pioneer VSX-53TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Expert System Settings 5 7 9 5 Use the buttons to adjust the frequency. When you have it at the level you want press ENTER. Set the frequencies within the -6 dB to +6 dB range in steps of 0.5 dB. If OVER appears in the display you have set the levels too high. Reduce them until OVER disappears. 6 The cursor automatically goes to the next frequency. Press ENTER and repeat steps 4 and 5 to adjust all the frequencies. 7 TRIM should be selected (if it isn't use the buttons to select it) and press ENTER. 8 Use the buttons to adjust the TRIM and press ENTER. TRIM will balance the volume level of each frequency in the overall volume of that speaker. 9 EXIT should be selected (if it isn't use the buttons to select it) and press ENTER. 10The cursor automatically goes to the next channel. Press ENTER and repeat steps 3 - 8 to adjust all the channels. 11EXIT should be selected (if it isn't use the buttons to select it) and press ENTER. Leave the setup by using the buttons to select EXIT and pressing ENTER. You can now go to DATA CHECK or leave the ACOUSTIC CAL EQ setting by using the buttons to select EXIT and pressing ENTER. 92