Pioneer VSX-53TX Owner's Manual - Page 87
FINE CHANNEL LEVEL should
View all Pioneer VSX-53TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Expert System Settings Fine Channel Level The following steps show you how to balance the sound output level of your speakers more finely than in the NORMAL setup (see page 38). Proper speaker balance is essential for obtaining high quality surround sound and the better the speaker balance the better surround sound you can get. Follow steps 1-5 on page 85, if necessary, to get to the starting point mentioned here. 1 FINE CHANNEL LEVEL should be selected, if it isn't use the buttons to select and press ENTER. 1-6 2 Use the buttons to adjust the level of the left channel. Press ENTER. Test tones will be output. WARNING: Be prepared! The test tones are output at a high volume level. MASTER VOLUME rotates to the reference position (0 dB) and after a few seconds the test tone is output. 3 Use the buttons to select the subsequent channel. Press ENTER. 1 2 3 Left 4 Adjust the level of the channel using the buttons. Adjust the channel level from -10dB to +10dB in 0.5dB increments. The default setting is 0dB. Try to get the volume level of the target speaker to match that of the front left speaker, which is the reference level. Adjust so that you hear both tones at the same volume. When you press ENTER you will automatically go to the next channel. 5 Press ENTER to select a new channel. Repeat step 3 for every channel. If you want to change a setting before proceeding Use the buttons to go back to the channel you want to adjust and press ENTER. Then follow step 3. 6 When done select EXIT (if it's not already selected) and press ENTER. Next, if you want, proceed to FINE CHANNEL DELAY. EXPERT 87