Pioneer VSX-53TX Owner's Manual - Page 82
Assigning the Component Video Inputs
View all Pioneer VSX-53TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Fine Tuning Your System Assigning the Component Video Inputs This receiver has two component video inputs. Their default settings are video inputs for the DVD/LD (COMPONENT VIDEO IN 1) and TV/SAT (COMPONENT VIDEO IN 2) functions, but you can reassign them if you want to use them as video inputs for other receiver functions (for example a VCR). See pages 16 and 17 for more on connecting equipment using component video cords. 1 Turn on the receiver and your TV, press RECEIVER on the remote control. 2 Press the SYSTEM SETUP button. 3-8 2 3 4 5 3 Looking at the on-screen display on your TV, use the buttons to select INPUT ASSIGN. Press the ENTER button. 4 Use the buttons to select COMPONENT-IN SELECT then press ENTER. 5 Use the buttons to select the component video input you want to reassign. Press the ENTER button. 6 Use the buttons to assign a receiver function. Choose between DVD/LD, TV/SAT, VCR1 and VCR2. 7 When you're finished use the buttons to select EXIT and press ENTER. You will leave the COMPONENT-IN SELECT mode. 8 Use the buttons to select EXIT and press ENTER. Then, use the buttons to select EXIT and press ENTER again. This exits the SYSTEM SETUP mode and returns to normal operation. Memo: If you connect any source component to the receiver using a component video input, you should also have your TV connected to this receiver's component video output. 6 82