Pioneer VSX-53TX Owner's Manual - Page 13
Easy Setup Guide Part 2
View all Pioneer VSX-53TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
EASY SETUP GUIDE Easy Setup Guide Part 2 Easy Setup Guide Part 2 1 Auto Surround Sound Setup If setting up your surround sound speakers seems like it's going to be an involved task you only need to use this quick, automatic method, known as the MCACC system, to achieve good surround sound. You'll need to hook up the microphone so that the receiver can hear and judge the distance, size, sound character and sound pressure level of the speakers and thus know what settings to make. First turn the volume down, then plug the microphone into the SETUP MIC jack on the front panel of the receiver and put the microphone into its stand. Follow the step-by-step guide to setting up your surround sound below. This will customize the surround sound for your listening environment. If you want to personalize your surround sound setups by making the settings manually go to "Setting Up for Surround Sound" (starting on page 36) and "EXPERT Setup" (starting on page 85). Make sure all the components you need, especially speakers, have been properly connected before you do the steps described here. 1 1 Hook up the microphone to the SETUP MIC jack on the Front Panel. microphone Center Speaker 2 Place the microphone at your normal microphone stand listening position. Use a table, chair or something else to put the microphone at the same height as you usually listen to your system from. Front Speaker (R) If you have a tripod you can affix the mic stand to it. Front Speaker (L) Listening Position Subwoofer 3 Surround Speaker (R) Surround Back Speaker (R) 4 Surround Speaker (L) 5 Surround Back Speaker (L) Switch on the receiver and your TV. Make sure your TV is set to this receiver as you will use the on-screen displays (OSDs) on your TV to follow these instructions. If you have a subwoofer turn it on. Press the RECEIVER button on the remote control. 6 Press the SYSTEM SETUP button and use the on-screen display (OSD) that appears on your TV. 7 The arrow should be pointing at SURROUND SETUP, press ENTER. 7 13