Pioneer VSX-54TX Owner's Manual - Page 93
Additional information, Specifications, Maintenance of external surfaces
View all Pioneer VSX-54TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Additional information 12 Specifications Amplifier section Continuous average power output of 110 watts* per channel, min., at 8 ohms, from 20 Hz to 20,000 Hz with no more than 0.09%** total harmonic distortion (front). Continuous Power Output Front 110 W + 110 W (20 Hz-20 kHz, 0.09%) Center 110 W (20 Hz-20 kHz, 0.09%) Surround 110 W + 110 W (20 Hz-20 kHz, 0.09%) Surround back . . . . 110 W + 110 W (20 Hz-20 kHz, 0.09%) Audio Section Input (Sensitivity/Impedance) LINE 335 mV/47 kΩ Frequency Response LINE 5 Hz to 100,000 Hz dB Output (Level/Impedance) LINE 335 mV/2.2 kΩ Tone Control BASS 6 dB (100 Hz) TREBLE 6 dB (10 kHz) LOUDNESS 4/+2 dB (100Hz/10 kHz) (at volume position -40dB) Signal-to-Noise Ratio (IHF, short circuited, A network) LINE 101 dB Signal-to-Noise Ratio [EIA, at 1W (1kHz)] LINE 83 dB * Measured pursuant to the Federal Trade Commission's Trade Regulation rule on Power Output Claims for Amplifiers ** Measured by Audio Spectrum Analyzer Composite Video / S-Video Section Input (Sensitivity/Impedance 1 Vp-p/75 Ω Output (Level/Impedance 1 Vp-p/75 Ω Signal-to-Noise Ratio 65 dB Frequency Response 5 Hz to 10 MHz dB Component Video Section Input (Sensitivity/Impedance 1 Vp-p/75 Ω Output (Level/Impedance 1 Vp-p/75 Ω Signal-to-Noise Ratio 65 dB Frequency Response 5 Hz to 100 MHz dB AM Tuner Section Frequency Range 530 kHz to 1,700 kHz Sensitivity (IHF, Loop antenna 350 µV/m Selectivity 25 dB Signal-to-Noise Ratio 50 dB Antenna Loop antenna Miscellaneous Power Requirements AC 120 V, 60 Hz Power Consumption 600 W Power Consumption in standby 0.8W AC outlet (switched 100 W (0.8 A) MAX Dimensions 420 (W) × 188 (H) × 464 (D) mm (16-9/16 (W) × 7-7/16 (H) × 18-5/16 (D) in.) Weight (without package 18.0 kg (39.7 lb) Furnished Parts Microphone 1 Microphone stand 1 Remote control unit 1 "AA" IEC LR6 batteries 2 AM loop antenna 1 FM wire antenna 1 Warranty card 1 These operating instructions 1 Note • Specifications and the design are subject to possible modifications without notice, due to improvements. Maintenance of external surfaces • Use a polishing cloth or dry cloth to wipe off dust and dirt. • When the surfaces are dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and wrung out well, and then wipe again with a dry cloth. Do not use furniture wax or cleaners. FM Tuner Section Frequency Range 87.5 MHz to 108 MHz Usable Sensitivity Mono: 13.2 dBf, IHF (1.3 µV/75 Ω) 50 dB Quieting Sensitivity Mono: 20.2 dBf Stereo: 38.6 dBf Signal-to-Noise Ratio Mono: 73 dB (at 85 dBf) Stereo: 70 dB (at 85 dBf) Distortion Stereo: 0.5% (1 kHz) Alternate Channel Selectivity 60 dB (400 kHz) Stereo Separation 40 dB (1 kHz) Frequency Response 30 Hz to 15 kHz ± 1dB Antenna Input 75 Ω unbalanced 93 En