Pyle PWD250 User Guide - Page 18
Remote Start Programmable Features, REMOTE START PROGRAMMABLE FEATURES
![]() |
View all Pyle PWD250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Remote Start Programmable Features 1. Engine Run Time. Selects between 10, 15, 20, and 30 minute run cycles. 2. Turbo Timer Feature. For vehicles equipped with a turbocharger, this feature allows the engine to continue running for up to 6 minutes after the ignition is turned off, so the turbo has time to cool down. 3. Cold Temperature Starting. Allows the vehicle to automatically start and run every 1, 2, 4, or 12 hours for severe cold weather. 4. Manual Transmission Mode. Selects between Quick Set and Safe operating modes. On manual transmission vehicles, the remote start feature will not operate unless the proper vehicle exit sequence is performed. These two modes protect against in-gear starting but are not completely without risk. Installation and safe use of the remote start feature on a manual transmission vehicle is the sole risk of the vehicle's owner, and the manufacturer assumes no liability for use in manual transmission vehicles. Manual Transmission Quick Set Mode Exit Sequence: Turn the ignition off and the engine will remain running. Exit the vehicle. When all doors are closed, press lock button to turn off engine and arm/lock doors. The system will be able to remote start as long as the alarm is not disarmed prior to remote starting. Manual Transmission Safe Mode Exit Sequence: With ignition on, press lock button for two seconds (button mode shifts to level 2) the press lock button again. Turn ignition off (engine will stay running) and exit vehicle. When all doors are closed, press lock button to turn off engine and arm/lock doors. The system will be able to remote start as long as the alarm is not disarmed prior to remote starting. 5. Parking Light Mode. Selects the operation of the parking light output while the vehicle is remote started. Choose between flashing output, constant output, and off. 6. Lock with Remote Start. Automatically locks the doors after remote starting. 7. Lock with Remote Shutdown. Automatically locks the doors 5 seconds after the remote start is shut down. 8. Yellow/Black Wire Programming. Selects between Factory Disarm, 3rd ignition (relay required), and Pulsed or Latched Defroster output. When set for Factory Disarm output, the Yellow/Black wire pulses on disarm and remote start to turn off a factory alarm. When set for 3rd Ignition output, the wire turns on with Ignition 1 and 2 relays. When set to Pulsed Defroster output, the wire pulses 10 seconds after remote starting. When set to Latched Defroster, the wire turns on 10 seconds after remote starting and remains on for 5 minutes. REMOTE START PROGRAMMABLE FEATURES Step Function Button 1 Button 2 Button 3 1. Engine Run Time 10 minutes 15 minutes 20 minutes 2. Turbo Timer Mode Off I minute 3 minutes 3. Cold Start Timer 1 hour 2 hours 4 hours 4. Manual Transmission Mode Quick set Safe 5. Parking Light w/Start Flashing Continuous Off 6. Lock on Remote Start No lock Lock 7. Lock on End Start Cycle No Lock Lock 8. Yellow/Black Wire Program Factory Disarm Ignition 3 output Defroster pulse 9. Diesel Wait-to-Start Mode 10 second timer Glow Plug Input Button 4 30 minutes 6 minutes 12 hours Defroster latch 18
![](/manual_guide/products/pyle-pwd250-user-guide-3b2fcb1/18.png)