Pyle PWD250 User Guide - Page 8

LED AND PARKING LIGHT INDICATIONS STATUS INDICATOR (LED) FUNCTIONS On Solid = Valet Mode Slow Flash = System Armed Rapid Flash = Passive Arming Rapid Flash while Ignition on = Open Zone Warning Rapid Flash while Ignition on and Anti-Carjack Mode Active = Entering Carjack Warning Stage Double Flash = Auto Cold Start Mode Activated PARKING LIGHT FUNCTIONS On Solid = Vehicle Remote Starting Flash I x = System armed Flash 2x = System disarmed Flash 4x = Defective zone warning (after arming) Flash 4x = Tamper indication (after disarming) TRANSMITTER FUNCTION QUICK REFERENCE TRANSMITTER OPERATION CHART Operation System Status Ignition Arm Disarmed Off Disarm Armed Off Remote Valet Disarmed Off Remote Start Either Off Auxiliary 1 Either Off Toggle Chirp Mode Either Off Immobilizer Disarmed Off Panic Mode Either Off Stop N Go Disarmed On Auto Cold Start Disarmed On Car Locator Either Off Shock Sensor Adjust Disarmed Off Sensor Bypass (Main) Armed Off Sensor Bypass (Opt) Armed Off 1st Button 2nd Button Button 1 Button 2 Button 1 Level Shift Button 1 Button 2 Level Shift Button 2 Button 3 Level Shift Button 3 Button 4* Button 2 Level Shift Button 1 Buttons 1&2 together Button 2 Level Shift Button 2 Button 2 Level Shift Button 2** Button 3 Button 3*** Button 4 Level Shift Button 4 Button 1 Button 1**** Button 4 Button 4*** * If system is disarmed, Button 4 will arm system and change chirp mode (normal to silent or vice versa) ** Must press button two times very quickly *** Brake pedal must be pressed while performing button sequence **** Press multiple times to switch between normal, warning bypass, and full bypass Level Shift: Pressing and holding a transmitter button for more than one second enters the Level Shift mode for two seconds. The 1-way transmitter's LED turns Green to indicate level shift, while the optional 2-way transmitter plays a chime to indicate level shift. While in level shift mode, pressing a transmitter button accesses the system's special features such asValet,Auxiliary, etc. After two seconds, the transmitter will automatically exit level shift mode if no other transmitter button has been pressed. 8