Pyle PWD250 User Guide - Page 9
Optional 2-way Transmitter With Lcd Display
View all Pyle PWD250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
OPTIONAL 2-WAY TRANSMITTER WITH LCD DISPLAY OPERATING INSTRUCTIONS REMOTE TRANSMITTER LAYOUT Button 3 Button 4 Button 5 the 2-way transmitter also provides audible and vibration alert in case the display is out of view. And, for night-time use the LCD is equipped with a backlight feature which is activated by pressing button 5. Button 2 Button 1 5-Button 2-way LCD Transmitter Each LCD transmitter button has two operating modes: standard and level shifted. Pressing a transmitter button for less than one second activates the standard function associated with that button (such as arm or disarm). Pressing a button for more than one second activates the level shift feature, then plays a chime and vibrates to signal the level is shifted. While the transmitter is level shifted, pressing transmitter buttons 1-4 accesses another level of commands providing expanded operation. The basic operation of the optional 2-way LCD transmitter is the same as the standard 4button transmitter, with a few added features. The built-in LCD display provides visual confirmation of system operations and status. After a function such as arming is selected, the LCD display will show confirming icons to indicate that the function has taken place. Additionally, the LCD display shows any intrusion attempts as they occur, and indicates the triggered zone. In addition to LCD display, SYSTEM STATUS RECALL Real-time system status can also be recalled at any time by pressing transmitter button 3 for less than one second. The system's current status will be shown on the LCD display. RANGE INDICATION The LCD display has an antenna icon that flashes every 4 seconds while the system is armed, to indicate the transmitter is in-range of the vehicle. 60 seconds after disarming the antenna icon will stop flashing. If the transmitter is not in-range of the vehicle when pressing a button, a low pitched audible alert will be heard. LOW BATTERY When the transmitter battery is in need of replacement, the display will show the battery icon. Replace with a fresh AAA alkaline battery. BUTTON LOCK The transmitter is equipped with a button lock feature to avoid accidental feature activation while in a purse or pocket. To lock the buttons press button 1 and button 5 together. To unlock the buttons press button 2 and 5 together. 9