Pyle PWD250 User Guide - Page 4

VALET MODE When the system is placed into the Valet Mode the security and remote start features will be disabled. However, the optional keyless entry and trunk release features will still function if installed.The valet mode may be accessed with either the valet switch or a remote transmitter. To enter or exit valet mode using the switch: 1. Be sure the system is disarmed. 2. Turn ignition on. 3. Press and hold the valet switch for 3 seconds. • The siren will chirp 3 times to enter or exit valet. 4. Turn ignition off. • The LED will turn on solid indicating the system is in valet mode, or turn off indicating valet mode exit. To enter or exit valet mode using the remote: 1. Press and hold button 1 for level shift. 2. Press button 1 again to turn valet mode. • The parking lights will flash 4 times to enter and 3 times to exit valet. • The LED will turn on solid indicating the system is in Valet Mode, or turn off indicating Valet Mode exit. • The optional 2-way LCD transmitter display will show "zzz" for valet . OPTIONAL TRUNK RELEASE The activate the system's auxiliary feature (or trunk release) press button 3 for level shift, then press button 3 again. If the vehicle's trunk pin is connected to the alarm, the optional 2way LCD transmitter will show the trunk open. OPTIONAL TRUNK DISARM The trunk disarm feature allows the alarm to disarm automatically when the auxiliary output is used to activate the optional trunk release. This eliminates having to first disarm the alarm before activating the trunk release. NOTE: This feature must be programmed during installation and only function if auxiliary is programmed for momentary output. CAR LOCATOR FEATURE The activate the system's car locator feature press button 3 twice rapidly. The siren will chirp and the parking lights will flash 6 times. REMOTE SENSOR BYPASS To bypass the shock sensor's warn-away while the system is armed, press button 1 twice rapidly. To bypass the sensor completely, press button 1 twice again. Pressing button 1 twice a third time will re-activate the sensor. The parking lights will flash to indicate the mode: One Flashes = Normal Two Flashes = Sensor 1 Warn away Bypass Three Flashes = Sensor 1 Complete Bypass If an optional dual-zone sensor is connected to the optional sensor port, that sensor's warnaway feature can be bypassed while the system is armed by pressing button 4 twice rapidly. To bypass the sensor completely, press button 4 twice again. Pressing button 4 twice a third time will re-activate the sensor. The parking lights will flash to indicate the mode: Four Flashes = Sensor 2 Warn away Bypass Five Flashes = Sensor 2 Complete Bypass NOTE: The system must be armed for at least 10 seconds prior to activating the remote sensor bypass feature. OPTIONAL ANTI-CARJACK FEATURE When selected, the optional anti-carjacking feature monitors the vehicle's doors while the ignition is on. If a door is opened, the anticarjacking feature will trigger, with progressively higher levels of alert. The Anti-Carjacking feature must be enabled during installation. 4