Pyle PWD901 User Manual - Page 16

SYSTEM PROGRAMMING, Entering Programming, Complete Default Reset, Alarm Programmable Features, ALARM

Page 16 highlights

SYSTEM PROGRAMMING Entering Programming To enter System Programming 1. Turn on ignition. 2. Within 5 seconds, press valet the proper number of times for the desired mode: 5 presses = Alarm Programming 10 presses = Remote Start Programming • The siren will chirp to indicate programming mode entered: 5 chirps = Alarm Mode 10 chirps = Remote Start Mode 3. Press the valet switch the number times equal to the Feature you want to change. • The siren will chirp each time the valet switch is pressed. A long chirp is equal to 5 presses. (Example: step 7 = 1 long chirp and 2 short chirps.) 4. Within 5 seconds, press the transmitter button corresponding to the desired operating mode for that Feature. • The siren will chirp either 1, 2, 3, or 4 times to indicate the button setting. 5. Repeat steps 3 and 4 to change additional features. 6. Turn off ignition to save changes. Complete Default Reset Follow this procedure to set the Programming Features to factory default settings. 1. Enter Alarm or Remote Start Feature program mode. 2. After entering programming mode, press Transmitter Button 1. • The siren will chirp once indicating the reset signal was received. • All Programming options are now set to factory default settings. 3. Turn ignition off. Alarm Programmable Features 1. Auto Rearm. Automatically rearms the system in case of accidental disarming. The system must be armed for at least 10 seconds before disarming, and the hood/trunk must not be opened or Auto Rearm will be bypassed. Auto Rearm with Lock will also lock the doors upon rearming. 2. Blue Wire Programming. Selects between a 20 or 30 second output after disarming for Dome light operation (default), and a 20 or 30 second output after arming for window roll-up. 3. Ignition Lock/Unlock. Automatically locks the doors when ignition is turned on and ALARM PROGRAMMABLE FEATURES Step Function Button 1 Button 2 1. Auto Rearming Off On/No Lock 2. Blue Wire Activation Disarm 20s Disarm 30s 3. Ignition Lock/Unlock Brake/On On/On 4. Door Lock/Unlock Pulse 1secL/1secUL 3secL/3secUL 5. Passive Arm Locking No Lock Lock 6. Override Mode No PIN Code PIN Code 7. Open Door Report 60 seconds Instant 8. Siren or Horn Mode Siren Horn 9. Auxiliary Output Timing Momentary 10s Timed 10. Starter Defeat Relay Normally Closed Normally Open 11. Anti-Carjack Mode Off On 12. Trunk Disarm Feature Off On Button 3 On/Re-Lock Arm 20s On/Off 1secL/1secULx2 30 seconds 30s Timed Button 4 Arm 30s Off/Off 30secL/1secUL 45 seconds* Latched 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

16
SYSTEM PROGRAMMING
Entering Programming
To enter System Programming
1. Turn on ignition.
2. Within 5 seconds, press valet the proper
number of times for the desired mode:
5 presses = Alarm Programming
10 presses = Remote Start Programming
• The
siren
will
chirp
to
indicate
programming mode entered:
5 chirps = Alarm Mode
10 chirps = Remote Start Mode
3. Press the valet switch the number times
equal to the Feature you want to change.
• The siren will chirp each time the valet
switch is pressed. A long chirp is equal to
5 presses. (Example: step 7 = 1 long chirp
and 2 short chirps.)
4. Within 5 seconds, press the transmitter
button corresponding to the desired
operating mode for that Feature.
• The siren will chirp either 1, 2, 3, or 4
times to indicate the button setting.
5. Repeat steps 3 and 4 to change additional
features.
6. Turn off ignition to save changes.
Complete Default Reset
Follow this procedure to set the Programming
Features to factory default settings.
1. Enter Alarm or Remote Start Feature
program mode.
2. After entering programming mode, press
Transmitter Button 1.
• The siren will chirp once indicating the
reset signal was received.
All Programming options are now set to
factory default settings.
3. Turn ignition off.
Alarm Programmable Features
1.
Auto Rearm. Automatically rearms the
system in case of accidental disarming. The
system must be armed for at least 10 seconds
before disarming, and the hood/trunk must not
be opened or Auto Rearm will be bypassed.
Auto Rearm with Lock will also lock the doors
upon rearming.
2.
Blue Wire Programming.
Selects between a
20 or 30 second output after disarming for
Dome light operation (default), and a 20 or 30
second output after arming for window roll-up.
3.
Ignition Lock/Unlock. Automatically locks
the doors when ignition is turned on and
ALARM PROGRAMMABLE FEATURES
Step
Function
Button 1
Button 2
Button 3
Button 4
1.
Auto Rearming
Off
On/No Lock
On/Re-Lock
2.
Blue Wire Activation
Disarm 20s
Disarm 30s
Arm 20s
Arm 30s
3.
Ignition Lock/Unlock
Brake/On
On/On
On/Off
Off/Off
4.
Door Lock/Unlock Pulse
1secL/1secUL
3secL/3secUL
1secL/1secULx2
30secL/1secUL
5.
Passive Arm Locking
No Lock
Lock
6.
Override Mode
No PIN Code
PIN Code
7.
Open Door Report
60 seconds
Instant
30 seconds
45 seconds*
8.
Siren or Horn Mode
Siren
Horn
9.
Auxiliary Output Timing
Momentary
10s Timed
30s Timed
Latched
10.
Starter Defeat Relay
Normally Closed
Normally Open
11.
Anti-Carjack Mode
Off
On
12.
Trunk Disarm Feature
Off
On