Pyle PWD901 User Manual - Page 2

ARMING OPERATION To arm the system press transmitter button 1: • The siren will chirp once. • The parking lights will flash once. • The doors will lock.* • The LED will turn solid for 10 seconds then start flashing slowly. After 10 seconds the system is armed. During Arming, if the hood or trunk is open or the brake pedal is pressed, the system will wait 10 seconds for the zone to close. If a door is open the system will wait up to 60 seconds for the zone to close (depending on door zone setting during installation). If a zone remains open after the wait period, the siren will chirp and the parking lights will flash 4 times to indicate the zone is still open. That zone will be ignored, but keep all other areas remain protected. While Armed, the system will trigger if: • The door, hood, or trunk is opened. • The brake pedal is pressed. • The shock sensor detects an impact. • An optional sensor is disturbed. When triggered by the door or hood/trunk input the siren will sound or the horn will honk, and the parking lights will flash for 30 seconds. If triggered by a sensor, the alarm cycle will last 15 seconds. If the alarm is triggered while the optional remote start is engaged, the remote start will immediately shut down. If a zone triggers the system 3 times during a single arming cycle, the system will bypass that zone, keeping the other zones protected, until the next time the system is armed. If the shock sensor detects a light impact to the vehicle or an optional sensor is disturbed, the system will chirp and the parking lights will flash 5 times to warn away the potential intruder. *Optional Feature PASSIVE ARMING OPERATION The passive arming feature allows the system to arm automatically without user intervention. This feature can be toggled on/off using the transmitter. To turn passive arming on/off: 1. Press and hold button 2 for level shift. 2. Press button 4. • The system will enter passive arming operation mode. • The optional 2-way LCD transmitter display will show "LAST DOOR ARM". To arm the system passively: 1. Turn the ignition key off. 2. Exit the vehicle and close all doors. • The siren will chirp and parking lights will flash once after closing the last door. • The LED flashes rapidly indicating that the system is preparing to arm. (The system can be armed at any time by pressing transmitter button 1.) NOTE: Opening the hood/trunk or a door resets the passive arming timer. • After 30 seconds the siren will chirp to indicate the system is armed. • The parking lights will flash once. • The doors will lock.†* † If Passive Locking was enabled during installation. DISARMING OPERATION To disarm the system press transmitter button 2. • The siren will chirp twice.¥ • The parking lights will flash twice.¥ • The doors will unlock.* • The dome light will turn on.* ¥ If the alarm was triggered while away, the system will respond with 3 chirps and 4 parking light flashes. * Optional Feature. 2