Pyle PWD901 User Manual - Page 17

unlocks when ignition is turned off.The system will not lock if any door is open when the ignition is turned on. Brake/On mode- the doors will lock after closing all doors and pressing the brake pedal with ignition on; the doors will unlock when ignition is turned off. On/On mode- the doors will automatically lock or unlock when ignition is turned on and off. On/Off mode- the doors will automatically lock with ignition, but not unlock with ignition. Off mode- no ignition control of door lock system. 4. Door Lock/Unlock Pulse. Selects between four door lock configurations: a 1-second lock and unlock pulse (standard), a 3-second lock and unlock pulse (for vacuum locks), a 1-second lock and two 1-second unlock pulses (for some Japanese cars), or a 30-second lock pulse and 1second unlock pulse (for automatic window roll-up on some European cars). 5. Passive Locking. Allows the system to automatically lock the doors on Passive Arming. 6. Override Mode. Selects normal or PIN code mode for Emergency Override feature. 7. Open Door Report. Sets the amount of delay before providing an open door zone warning after arming. Settings are 60-second delay, instant (no delay), 30-second delay, and 45-second delay with instant triggering (no warn after delay). 8. Siren / Horn Output. Selects between siren or horn programming for the siren output wire. Note: when the siren or horn mode is set for chirps, the arm/disarm chirps may be toggled on or off at any time using the transmitter. If the siren or horn chirps are set to off, the chirps cannot be toggled on/off using the transmitter. 9. Auxiliary Function. Selectable for Momentary,Timed, or Latched operation. Momentary operation provides an output for .8 seconds. Timed operation provides an output that turns on for 10 /30 seconds or each time the transmitter button is pressed. If the button is pressed again during the timed period, the output will turn off. Latched operation provides an output that turns on when the transmitter button is pressed and turns off when the button is pressed again. 10. Starter Defeat Relay operation. Selects between normally closed (default) or normally open operation. 11. Anti-Carjack Mode. Enables the AntiCarjacking feature. 12. Trunk Disarm Feature. When selected, activating the Auxiliary function to open the trunk will automatically disarm the system. IMPACT SENSOR ADJUST The system's impact sensor has 8 levels of sensitivity (level 1=most sensitive) which can be adjusted using the remote transmitter. To adjust the system's impact sensor: 1. Make sure the system is disarmed and ignition is turned off. 2. Press and hold button 4 for level shift. 3. Press button 4 again to enter adjust mode. • The siren will chirp a number of times to indicate the current sensitivity level. 4. Press button 1 to decrease sensitivity or button 2 to increase sensitivity. • The siren will chirp a number of times to indicate the new sensitivity level. 5. Test the sensitivity. • The siren will chirp 5 times to indicate warn-away and sound for 3 seconds to indicate full trigger. 5. When desired sensitivity is reached, press and hold button 4 for level shift. 6. Press button 4 again to exit adjust mode. 17