Pyle PWD901 User Manual - Page 21
Starter Defeat Relay Wiring Diagrams
View all Pyle PWD901 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
STARTER DEFEAT RELAY WIRING DIAGRAMS The Starter Defeat/Anti-Grind relay socket can be wired in either normally closed or normally open configuration. In either configuration, the Starter Defeat relay also provides Anti-Grind protection during remote start control, to prevent accidentally grinding the starter if attempting to start the vehicle using the key. The main unit default setting is normally closed operation. In normally closed configuration (default), the starter is only disabled when the alarm is powered up and in the armed state. In the event power to the alarm module is disconnected, the vehicle will be able to start using the key, even if the alarm had been armed prior to power loss. The normally closed configuration is considered a fail-safe because the vehicle will still start if the alarm loses power (blown fuse, etc.). This is the recommended installation method. The normally open configuration provides a higher level of security by only allowing the vehicle to start if the system powered up and is in the disarmed state. If power to the system is lost for any reason, even while disarmed, the vehicle will be unable to start. The normally open configuration provides the highest level of security but without fail-safe. If the normally open configuration is selected, Programmable Alarm Feature step 10 must be set to button 2. STARTER DEFEAT NORMALLY CLOSED STARTER DEFEAT NORMALLY OPEN 21