Pyle PWD901 User Manual - Page 18

Remote Start Programmable Features 1. Engine Run Time. Selects between 10, 15, 20, and 30 minute run cycles. 2. Turbo Timer Feature. For vehicles equipped with a turbocharger, this feature allows the engine to continue running for up to 6 minutes after the ignition is turned off, so the turbo has time to cool down. 3. Cold Temperature Starting. Allows the vehicle to automatically start and run every 1, 2, 4, or 12 hours for severe cold weather. 4. Parking Light Mode. Selects the operation of the parking light output while the vehicle is remote started. Choose between flashing output, constant output, and off. 5. Lock with Remote Start. Automatically locks the doors after remote starting. 6. Lock with Remote Shutdown. Automatically locks the doors 5 seconds after the remote start is shut down. 7. Yellow/Black Wire Programming. Selects between Factory Disarm, 3rd ignition (relay required), and Pulsed or Latched Defroster output. When set for Factory Disarm output, the Yellow/Black wire pulses on disarm and remote start to turn off a factory alarm. When set for 3rd Ignition output, the wire turns on with Ignition 1 and 2 relays. When set to Pulsed Defroster output, the wire pulses 10 seconds after remote starting. When set to Latched Defroster, the wire turns on 10 seconds after remote starting and remains on for 5 minutes. 8. DieselWait-to-Start Mode. Selects between the 10 second countdown timer for diesel vehicles without a glow plug wire, or between glow plug wire monitoring for vehicles with a wait-to-start indicator light. REMOTE START DIP SWITCHES 1. Tachless Mode Crank Time. OFF= standard (0.8 seconds) crank time. ON= extended (1.8 seconds) crank time for the tachless operation mode. Not used when RPM monitoring with tach wire is connected. 2. Engine Start Sense. OFF= Tach Start for actual RPM monitored starting. ON= Smart Start for tachless operation. 3. Ignition 2 Relay Program. OFF= Ignition 2 operation. ON= Accessory 2 operation. In accessory 2 mode the output will not turn on until after engine cranking. 4. Transmission Mode. OFF= automatic transmission. ON= manual transmission. 5. Gas/Diesel Mode. Sets the crank delay after ignition turns on. OFF= gasoline engine. ON= diesel engine. See Orange/Violet (Glow Plug) wire description and Remote Start Programmable Features step#8 6. RPM Signal LED. ON= Turns on the RPM LED for tach wire locating/testing. REMOTE START PROGRAMMABLE FEATURES Step Function Button 1 Button 2 Button 3 1. Engine Run Time 10 minutes 15 minutes 20 minutes 2. Turbo Timer Mode Off I minute 3 minutes 3. Cold Start Timer 1 hour 2 hours 4 hours 4. Parking Light w/Start Flashing Continuous Off 5. Lock on Remote Start No lock Lock 6. Lock on End Start Cycle No Lock Lock 7. Yellow/Black Wire Program Factory Disarm Ignition 3 output Defroster pulse 8. Diesel Wait-to-Start Mode 10 second timer Glow Plug Input Button 4 30 minutes 6 minutes 12 hours Defroster latch 18