Pyle PWD901 User Manual - Page 7
Auto Cold Start, Safety Features, Manual Transmission Mode, Turbo Timer Mode
![]() |
View all Pyle PWD901 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
To resume driver control: 1. Unlock the doors by pressing transmitter button 2. 2. Turn on the ignition. • The vehicle resumes driver control, when the brake pedal is pressed. AUTO COLD START This feature allows the system to start and run the vehicle every 1, 2, 4, or 12 hours (selectable by your installer) in a 24 hour period.This allows the engine to remain at an operational temperature in extremely cold weather. Auto Cold Start interval timing must be chosen during installation. Engaging the Auto Cold Start feature: To turn Auto Cold Start on: 1. Press and hold the brake pedal. 2. Press and hold button 2 for level shift. 3. Press button 1. 4. Release the brake pedal. • The vehicle will start and run the first interval to confirm cold start activation. Use the Remote Engine Shutdown procedure before first run cycle is completed. The Auto Cold Start feature will remain engaged and start at the pre-programmed intervals. NOTE: The Auto Cold Start feature is not compatible with manual transmission vehicles. Disengaging the Auto Cold Start feature: The Auto Cold Start feature can be deactivated by pressing the brake pedal. SAFETY FEATURES The System will not start the vehicle if the brake pedal is pressed or the hood is open. Also, if the brake is pressed or the hood is opened while remote running, the remote start will shut down. MANUAL TRANSMISSION MODE On manual transmission vehicles, the remote start feature will not operate unless the proper vehicle exit sequence is performed. This operating mode protects against in-gear starting but is not completely without risk. Installation and safe use of the remote start feature on a manual transmission vehicle is at the sole risk of the vehicle's owner, and the manufacturer assumes no liability for installation in manual transmission vehicles. Manual Transmission Safe Mode Exit Sequence: With the engine running and the parking brake set, press the unlock button. Turn ignition off (engine will stay running) and open the doors, then exit the vehicle. When all doors are closed, press lock button to turn off the engine and arm the system. The system will be able to remote start as long as the alarm is not disarmed prior to remote starting. NOTE: If the turbo timer feature is programmed, the engine will not turn off until the end of the turbo timer program cycle. TURBO TIMER MODE For vehicles equipped with a turbo-charged engine, the optional turbo timer feature may be programmed to run the engine at idle for an additional period of time after the ignition is turned off. The run-time may be programmed for a 1, 3, or 6 minute cycle, allowing the turbo proper time to cool down, extending its life. To activate the Turbo Timer feature: 1. Make sure the engine is running. 2. Press button 2. 3. Turn ignition off. • The engine will continue to run for 1, 3, or 6 minutes. 4. Exit the vehicle. 7
![](/manual_guide/products/pyle-pwd901-user-manual-3d6b118/7.png)