RCA CDRW121 User Guide - Page 10

Playing Program Clearing Program EN You can program up to 32 tracks in dual off mode & 16 tracks in dual on mode in any desired sequence. Tracks can be programmed more than once but each time counts as a 1. Press and hold PROGRAM for 1 about 3 seconds. SHIFT PROGRAM track. 1. Enter program mode. 1 SHIFT PROGRAM CD CDR 2. Select tray if Dual mode is off. 2. Confirm clearing program. OK 3. Select track (e.g. 03). 0 9 4. Confirm selection. OK 5. Repeat steps 2-4 for more selections. 6. Review program. ERASE 7. Erase unwanted tracks. 8. Enter program standby mode. STOP Display shows total programmed tracks and time Tips on program: • Repeat steps 1-4 again if you want to further edit your program in program standby mode. • Opening or closing disc tray will quit from program mode. Input program will be lost. • You can also assign your discs with disc titles & playback programs for recall everytime you load the discs on the player. (see p.13 for details) Tips on general playing: • Place a CD, audio CD-R or audio CD-RW in the appropriate tray recess with label side up. • To avoid music skips or inferior sound quality, please be sure that the disc is free from dust particles or scratches. • An unfinalized disc will not play on tray A. 9. Start program playback. PLAY 10. Quit program mode. 1 SHIFT PROGRAM 9