RCA RC5215 User Manual - Page 10

Connections & Setup TV TV S-VIDEO VIDEO IN AUDIO OUT L R AUDIO IN L R CABLE OR OFF-AIR SIGNAL ANT IN DVD S-Video cable is optional DVD PLAYER AC IN 3 2 1 Pr Pb S-VIDEO Y VIDEO OUT DIGITAL AUDIO OUT RIGHT LEFT AUDIO OUT To AC Outlet DVD Player + TV with Audio/Video Input Jacks 1. Connect the audio cables to the AUDIO OUT L (left - white) and R (right - red) jacks on the back of your DVD Player, and to the corresponding Audio Input jacks on your TV. 2. Connect the video cable. • Basic video connection - Connect the video cable (yellow) to the VIDEO OUT jack on the back of your DVD Player, and to the Video Input jack on your TV. OR • S-Video (optional) - If your TV has an S-Video Input jack, connect the S-Video cable to the S-VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your TV doesn't have S-Video, use the basic video connection listed above. OR • Component video (optional) - If your TV has component video (Y, P , and P jacks) use B R video-grade cables for the Y, PB, and PR connections. Note that it is essential to match the color coded connectors with a compatible TV. If your TV doesn't have component video, use the basic video connection listed above. 3. Connect the AC power cord to the AC IN jack on the back of your DVD Player, and plug the other end into an AC outlet. Note: Your cable or off-air connection to the television should not be affected by this connection. Connect your cable or off-air antenna to your television as you normally would. You may need to consult your television manual for details. Go to page 15 8 Chapter 1