Ricoh Aficio GX e3300N User Guide - Page 117

Using Web Browser Changing the Printer Settings (GX e3350N only) You can change the printer settings. 1. Launch the Web browser. 2. In the address bar, enter "http://(printer's IP address or host name)/". 3. Click [Configuration], and then click [General Settings]. A dialog box for entering the user name and password opens. 4. Enter the user name and password, and then click [OK]. If this is the first time to do this, enter "admin" as the user name and leave the password blank. To ensure security, it is important you change the password. 4 5. Specify the printer settings. 6. Click [OK]. The specified settings are transmitted to the printer. Notifying the Printer Status by E-mail You can be notified of the printer status by e-mail on an occasion such as if the printer runs out or paper or paper is jammed. The e-mail notifying the printer status will be sent to the e-mail address specified as the destination in advance. • Depending on your e-mail application, a phishing warning message might appear when you receive e-mail. To stop this warning message appearing, see your e-mail application's Help for details about registering trusted senders. You can also specify the timing and status to notify. The following status can be notified: • The printer error has occurred. • The ink has run out. • The ink will run out soon. • The Ink Collector Unit must be replaced now. • The Ink Collector Unit must be replaced soon. • The paper has run out. • The paper has been jammed. • The paper type is wrong. 115