Ricoh Aficio GX e3300N User Guide - Page 421

Paper • Ink smearing can be caused by environmental conditions (such as high humidity) and the type of image being printed (such as ink-heavy images). If smearing occurs, set [Print Quality] to [Quality priority] or [Speed priority]. This may stop the ink smearing. • Roller marks might appear on printed images. • If paper is fed from the bypass tray, roller marks might appear on the printed image. • To ensure water and oil resistance, leave the printed sheet to dry for about a day. • Some print images can cause the paper to curl, which creates patchy print. If this happens, set 2 [Print Quality] to [Quality priority]. • When using these sheets, see the instructions supplied with them. • Duplex printing is not supported. Envelopes • Up to 20 envelopes can be loaded in tray 1. • Flatten envelopes. • Load envelopes carefully, because the printable area depends on the orientation. • Set the envelope selector to the rear position before printing. • Duplex printing is not supported. Thick paper • Thick paper is heavier than 157 g/m2 (42 lb.). • You can insert paper with weights up to 255 g/m2 (60 lb.) into the bypass tray. • Insert paper with the print side face up into the bypass tray. • Duplex printing is not supported. Cautions to Observe After Printing Depending on the paper type, the ink may take a while to dry. Before handling, make sure printed sheets have fully dried. Otherwise, the ink may smudge. • The ink may smear depending on the type of image. If this happens, set the envelope selector to the rear position . Non-compatible Paper Check if the paper is compatible. Do not use paper that is: • wrinkled, folded, or damaged • wavy at the ends • curled 91