Ricoh Aficio GX e3300N User Guide - Page 91

Paper Envelopes • Up to 20 envelopes can be loaded in tray 1. • Flatten envelopes. • Load envelopes carefully, because the printable area depends on the orientation. • Set the envelope selector to the rear position before printing. • Duplex printing is not supported. 2 Thick paper • Thick paper is heavier than 157 g/m2 (42 lb.). • You can insert paper with weights up to 255 g/m2 (60 lb.) into the bypass tray. • Insert paper with the print side face up into the bypass tray. • Duplex printing is not supported. Cautions to Observe After Printing Depending on the paper type, the ink may take a while to dry. Before handling, make sure printed sheets have fully dried. Otherwise, the ink may smudge. • The ink may smear depending on the type of image. If this happens, set the envelope selector to the rear position . Non-compatible Paper Check if the paper is compatible. Do not use paper that is: • wrinkled, folded, or damaged • wavy at the ends • curled • absorbent • dry and conducive to static buildup • already printed on (such as the back of pre-printed paper) • pre-printed (unless specified) • heat sensitive/non-carbon • too thick or thin • pre-stitched • glued or tacked • stapled or clipped together 89