Ricoh Aficio MP C4502 General Settings Guide - Page 61
LAN Type, Ping Command, Permit SNMP V3 Communication, Permit SSL / TLS Communication, Host Name,
View all Ricoh Aficio MP C4502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Interface Settings ❖ LAN Type When you have installed the IEEE 802.11b interface unit, select the method of connection. The default setting is Ethernet. [LAN Type] is displayed when wireless LAN board is installed. If Ethernet and IEEE 802.11b (wireless LAN) are both connected, the selected interface has priority. ❖ Ping Command 2 Check the network connection with ping command using given IP address. If you fail to connect to the network, check the following, and then retry the ping command. • Make sure that "TCP/IP" in [Effective Protocol] is set to "Effective". • Check that the machine with assigned IP address is connected to the network. • There is a possibility that the same IP address is used for the specified equipment. ❖ Permit SNMP V3 Communication Set the encrypted communication of SNMPv3. The default setting is Encryption / Clear Text. If you select to [Encryption Only], you need to set an encryption password for the machine. ❖ Permit SSL / TLS Communication Set the encrypted communication of SSL / TLS. The default setting is Ciphertext Priority. If you set to [Ciphertext Only], you need to install the SSL certificate for the machine. ❖ Host Name Specify the host name. Enter the host name using up to 63 characters. ❖ Machine Name Specify the machine name. Enter the machine name using up to 31 characters. 53