Ricoh CL7000 Operating Instructions - Page 36
Cleaning the Registration Roller
UPC - 026649009006
View all Ricoh CL7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Cleaning and Adjusting the Printer Cleaning the Registration Roller R CAUTION: • The inside of the printer be- comes very hot. To avoid burns, do not touch parts labelled "hot C Wipe around the registration roll- er by turning it and applying a soft damp cloth. 2 surface", otherwise it could cause a burn. Clean the roller when replacing the black development unit. A Turn off the power, and then un- plug the power cable. B Open the right cover as shown. ZDJH704J Important ❒ Do not use chemical cleaners or organic solvents such as thinners or benzene. D Close the right cover by pushing the area labeled "PUSH". ZDJH206J The registration roller is set as shown. ZDJH703J ZDJP708J E Plug in the power cable, and then turn on the power. 30
Cleaning and Adjusting the Printer
30
2
Cleaning the Registration Roller
R
CAUTION:
Clean the roller when replacing the
black development unit.
A
Turn off the power, and then un-
plug the power cable.
B
Open the right cover as shown.
The registration roller is set as
shown.
C
Wipe around the registration roll-
er by turning it and applying a
soft damp cloth.
Important
❒
Do not use chemical cleaners or
organic solvents such as thin-
ners or benzene.
D
Close the right cover by pushing
the area labeled
“
PUSH
”
.
E
Plug in the power cable, and then
turn on the power.
•
The inside of the printer be-
comes very hot. To avoid burns,
do not touch parts labelled “hot
surface”, otherwise it could
cause a burn.
ZDJH206J
ZDJH703J
ZDJH704J
ZDJP708J