Ricoh CL7000 Operating Instructions - Page 87
Removing Misfed Paper, Detaching the 2 Tray Finisher, Opening and Closing the Duplex Reversal Unit
UPC - 026649009006
View all Ricoh CL7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Removing Misfed Paper Removing Misfed Paper If a paper misfeed occurs, an error message appears indicating the location of the misfed paper on the display. B Use both hands to push it straight back in, and let go when it clicks into place. ❖ Misfeed Recovery This printer has a misfeed recovery function that sends misfed paper to the standard tray or right cover. Usually, you can remove the mis- fed paper from one or other of these trays. 4 Detaching the 2 Tray Finisher There are times when you may need to detach the 2 tray finisher from the printer to remove misfed paper. This section describes how to detach the 2 tray finisher. A Hold the handle at the top of the 2 tray finisher firmly using one hand, pull the 2 tray finisher straight out, and let go when it stops. ZHXH350J The 2 tray finisher is reattached to the printer. Important ❒ Attach the 2 tray finisher to the printer after closing the duplex reversal unit. Opening and Closing the Duplex Reversal Unit There are times when you may need to detach the duplex reversal unit to remove misfed paper. This section describes how to detach the duplex reversal unit. A Push up the lock release button and leave it in place. ZHXH450J The 2 tray finisher is detached from the printer. ZHXH770J 81