Ricoh CL7000 Operating Instructions - Page 57
Loading Paper in Tray 2 and the Optional Paper Feed Unit, Press the side guide green le
UPC - 026649009006
View all Ricoh CL7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Loading Paper Loading Paper in Tray 2 and the Optional Paper Feed Unit B Press the side guide green lever (A), adjust the position of the guide by moving it in the direction of the arrow (B). Paper of different sizes can be loaded in Tray 2 (standard) and the 500- and 1000-sheet paper feed units (optional) by adjusting the positions of the side and end guides. This section describes loading paper in Tray 2 (standard). 3 Note ❒ If the side and end guides are in the right positions for the paper to be loaded, they do not have to be adjusted. A Slowly slide the paper tray out, until it stops. ZDJY802J C Adjust the end guide according to the size and orientation of the paper by gripping both edges of the guide (A), and then moving it in the direction of the arrow (B). ZDJH005J B Adjust the side guide according to the size and orientation of the paper as follows: A Release the side guide lock. ZHXH760J D Align all four sides of the paper stack, and then load it in the tray. ZDJY901J ZDJY003J Important ❒ Check that the top of the stack is not higher than the limit mark inside the tray. 51