Ricoh CL7000 Operating Instructions - Page 62

Paper and Other Media Loading Paper in the Bypass Tray Limitation ❒ You cannot use the following functions when printing on paper load- Besides regular paper, you can use the bypass tray to load thick paper, ed in the bypass tray: • Duplex Print envelopes, OHP transparencies, pa- • Collate, Job Separation per longer than A3L, and paper that • Staple/Punch cannot be loaded in the paper trays or paper feed unit. • Auto Tray Select 3 Note A Open the bypass tray. ❒ The bypass tray can accommodate sheets 90-305 mm wide and 148- 457 mm long. However, the paper size must be set using the control panel. When using the RPCS print- er driver, sheets of up to 1260 mm in length can be set. ❒ If you load custom size paper or special paper, select the paper size using the control panel. The RPCS printer driver can select the paper size using the printer driver properties. The paper size selected using the printer driver overrides that selected using the control panel. See p.58 "Specifying custom size paper for the Bypass Tray". ZDJH202J Note ❒ If you load A4 or larger size pa- per, pull out the bypass tray extension, and then flip it open. ❒ If you load thick paper, OHP transparencies, or envelopes, make the settings for thick paper or OHP transparencies using the control panel or printer driver. See p.59 "Specifying a paper type for the Bypass Tray". ❒ The number of pages that can be ZDJH203J loaded in the bypass tray differs depending on paper type. Check that the top of the stack is not high- er than the limit mark inside the tray. ❒ When loading paper in the bypass tray, use K orientation if possible. 56