Ricoh CL7000 Operating Instructions - Page 63
Paper Input, Bypass Size, 11 x 17
UPC - 026649009006
View all Ricoh CL7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Loading Paper B Slide the side guides outward (A), and then load paper print side up, until it stops (B). D Set the paper size using the con- trol panel as follows: A Press {Menu}. ZDJH204J C Adjust the side guides to fit the paper width. ZDJH205J Important ❒ Check that the top of the stack is not higher than the limit mark inside the tray. ❒ Shuffle the paper before loading the stack onto the tray, so multiple sheets are not fed in together. On Line Menu Escape Job Reset Form Feed Power Error Data In #Enter 3 ZDJS001N "Menu" appears on the display B Press {U} or {T} to display "Paper Input" menu, and then press {Enter #}. The following message appears on the display: Menu: Paper Input C Check "Bypass Size" appears, and then press {Enter #}. The following message appears on the display. Paper Input: Bypass Size D Press {U} or {T} to display the size and orientation of the paper in the bypass tray. Bypass Size *11 x 17 After about two seconds, the display returns to the menu. 57