Ricoh CL7000 Operating Instructions - Page 64
Specifying custom size paper for the Bypass Tray, Bypass Tray
UPC - 026649009006
View all Ricoh CL7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Paper and Other Media E Press {On Line}. "Ready " appears on the display. Ready B Press {U} or {T} to display "Paper Input", and then press {Enter #}. The following message appears on the display. Menu: Paper Input Specifying custom size paper for the Bypass Tray C Check "Bypass Size" appears, 3 Important and then press {Enter #}. The following message appears on ❒ The paper size selected using the the display: printer driver overrides that select- ed using the control panel. You do not have to make settings using the control panel if you already made Paper Input: Bypass Size them using the printer driver. However, when printing with a printer driver other than the RPCSTM printer driver, you must make the settings using the control pan- D Press {U} or {T} to display "Cus- tom Size", and then press {Enter #}. The following message appears on the display: el. For details about the printer driver, see Help. Bypass Size: ❒ The printer cannot print from ap- Custom Size plications that do not support custom size paper. E Press {U} or {T} to set the horizon- A Press {Menu}. tal value, and then press {Enter #}. The following message appears on the display: On Line Menu Escape Job Reset Form Feed Power Error Data In #Enter Custom Size: Vert. 297mm F Press {U} or {T} to set the vertical value, and then press {Enter #}. ZDJS001N "Menu" appears on the display. Custom Size: Horiz. 210mm After about two seconds, the display returns to the menu. 58