Ridgid LM-100 Owners Manual - Page 6
Description, Specifications, And Standard Equipment, Specific Safety Information - manual
View all Ridgid LM-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
micro LM-100 Laser Distance Meter for one piece of equipment may become hazardous when used with other equipment • Keep handles dry and clean; free from oil and grease. Allows for better control of the equipment. Service • Have your equipment serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the tool is maintained. Specific Safety Information WARNING This section contains important safety information that is specific to this tool. Read these precautions carefully before using the micro LM100 Laser Distance Meter to reduce the risk of eye injury or other serious personal injury. SAVE THESE INSTRUCTIONS! Keep this manual with the tool for use by the operator. Laser Distance Meter Safety • Do not look into the laser beam. Looking into the laser beam may be hazardous to the eyes. Do not look at the laser beam with optical aids (such as binoculars or telescopes). • Do not direct the laser beam towards other people. Make sure the laser is aimed above or below eye level. Laser beams may be hazardous to the eyes. If you have any question concerning this Ridge Tool product: • Contact your local RIDGID distributor. • Visit www.RIDGID.com or www.RIDGID.eu to find your local Ridge Tool contact point. • Contact Ridge Tool Technical Services Department at [email protected], or in the U.S. and Canada call (800) 5193456. Description, Specifications And Standard Equipment Description The RIDGID® micro LM-100 provides simple, quick, and accurate distance readings at the push of a button. You simply push the measurement button to turn on the class II laser and point at the remote or difficult to reach place to be measured to, then push the measurement button again. The micro LM-100 provides a quick measurement on a clear easy to read backlit LCD display. Specifications Range 0.05 to 50m* (0.16 ft to 164 ft*) Measuring Accuracy Up To 10m (2, Standard Deviation Typically: ±1.5mm** (± 0.06 in**) Measuring Units m, in, ft Laser Class Class II Laser Type 635 nm,